Instructions for use and maintenance
This manual is owned by GEA Niro Soavi Any reproduction, even partial, is prohibited.
04C100-4C0
GEA Niro Soavi
64
4.1 Shipping
GEA Niro Soavi
provides packaging, in agreement with the client and in relation to the type of
shipping, designed to protect the machine during transport.
WARNING:
Packaging, shipping and storage.
Any packaging, lifting, handling, shipping and unpacking may be done only by expert staff
(load harnessing, crane operation, lift truck operation, etc.) assisted by persons familiar with
the machine itself.
CAUTION:
During such work, staff must wear individual safety equipment: gloves, safety boots, work
overalls.
CAUTION:
Staff must observe the following general rules:
- keep away from loads before lifting and lowering;
- do not stand under suspended loads;
- keep unauthorised persons away from the handling area
If the load must be guided during lifting, use appropriate equipment to maintain the safety
distance from the suspended load.
CAUTION:
Failure to observe these rules can cause serious damage and injury.
Shipping must also be done by qualified staff who will be precisely instructed about the loading of
the machine on the vehicle.
The machine must be secured with straps or other equipment onto the vehicle's load bed to prevent
it tipping over.
The machine will be shipped as follows, depending on the destination:
Summary of Contents for Niro Soavi One7TS
Page 2: ......
