manualshive.com logo in svg

GEA HG88e series, Assembly Instruction Manual, Page: 14 / 38

Share
Download
GEA HG88e series Assembly Instruction Manual Download Page 14

14

 D
 GB
 F
 E
 I
 Ru

96260-08.2015-DGbFEIRu

4

|

 Compressor assembly

Fig. 19

Fig. 20

Valve spindle seal

Release

Tighten

Pipe connection

Pipe connection

4.8  Operating mode of the lockable service connections

Fig. 21

Opening the shut-off valve:

Spindle: turn to the left (counter-clockwise) as far as it will go. 
—> Shut-off valve completely opened / service connection closed.

Fig. 22

Opening the service connection

Spindle: Turn ½ - 1 turn clockwise. 
—> Service connection opened / shut-off valve opened.

Connection
blocked

Spindle

Spindle

Connection
open

Compressor

Compressor

Service connec-
tion closed

Service connec-
tion opened

4.7  Operating the shut-off valves

  Before opening or closing the shut-off valve, release the valve spindle seal by approx. ¼ of a turn 

counter-clockwise.

  After activating the shut-off valve, re-tighten the adjustable valve spindle seal clockwise.

After activating the spindle, generally fit the spindle protection cap again and tighten with 14-16 Nm. 

This serves as a second sealing feature during operation.

Summary of Contents for HG88e series







































Reviews:

No comments