![GEA CONTRA CN Installation And Operating Instructions Manual Download Page 10](http://html1.mh-extra.com/html/gea/contra-cn/contra-cn_installation-and-operating-instructions-manual_3974414010.webp)
Safety
10
BA.10A.CNY.001.01.10.GB
2.11 Cleaning
CIP and SIP methods must be in accordance with the latest
current guidelines of the EC.
When special cleaning agents and methods are used, the
supplier must confirm that they are safe for the materials in-
volved.
W A R N I N G
!
Danger from pressure surge! Liquids under high pressure can
be forcibly ejected from the pump.
Pressure surge can cause bodily injury or damage to the plant
and pump.
•
Before sterilisation always evacuate the system com-
pletely!
2.12 Repair contract
The duty to follow the legal regulations on work safety and the
regulations on environmental protection means that all com-
mercial enterprises must protect their employees, the public
at large, and the environment from the harmful effects of haz-
ardous materials.
Examples of legal regulations on work safety:
•
the Workplace Act (ArbStättV)
•
the Hazardous Materials Act (GefStoffV)
•
the accident prevention regulations(BGV A1)
•
and all applicable laws, rules, guidelines, regulations etc.
in the country of operation.
Examples of regulations on environmental protection:
•
the Recycling and Waste Law (KrW/AbfG)
•
the Water Economy Law (WHG)
•
and all applicable laws, rules, guidelines, regulations etc.
in the country of operation.
Certificate of non-objection
The certificate of non-objection attached to the shipment is a
component of the inspection/repair contract. This does not af-
fect our right to refuse acceptance of this contract for other
reasons.
The certificate of non-objection can be found on 57.
HILGE products and their parts will only be inspected/re-
paired if the certificate of non-objection is present and has
been correctly completed by authorized and qualified techni-
cal personnel.
Pumps which have been operated in media exposed to radi-
ation will not be accepted.
If any additional safety measures are required even after the
careful draining and cleaning of the pump, the necessary in-
formation must be provided.