13
Appendix
13.1
Lists
13.1.1 Abbreviations and terms
Abbreviation
Explanation
°
Symbol for the grade of a scale [degrees]
All degree data is assumed to be angle degrees unless explicitly specified
otherwise.
°C
Unit of measurement of temperature [degree Celsius]
°F
Unit of measurement of temperature [degree Fahrenheit]
AISI
American Iron and Steel Institute; material designation
ATEX
Atmosphères Explosibles
Directive of the European Union on explosion protections
AZ
Venting cylinder
bar
Unit of measurement of pressure [bar]
All pressure data is assumed to be gauge pressure [barg] unless explicitly
specified otherwise.
CFR
Code of Federal Regulations; collection of US federal regulations
d
Short name for diameter
DIN
German standard issued by DIN (Deutsches Institut für Normung e.V.,
German Institute for Standardisation)
dm³
N
Unit of measurement of volume [cubic decimetre under standard
conditions]
DN
DIN nominal width
EN
European Standard
EPDM
Ethylene Propylene Diene Rubber
Material designation, short designation according to DIN/ISO 1629
FDA
U.S. Food and Drug Administration
Food monitoring and drug administration in the USA
H
2
O
2
Hydrogen peroxide; chemical formula
ISO
International standard issued by the International Organisation for
Standardisation
m/s
Unit of measurement of speed/velocity [metres per second]
min.
Unit of measurement of time [minute]
mm
Unit of measurement of length [millimetre]
μm
Unit of measurement of length [micrometre]
NC
Normally Closed; direction of action spring-closing/air-opening
Appendix
Lists
430BAL013317EN_1
58
11.03.2019
Summary of Contents for Aseptomag AMV
Page 60: ......
