GE XDP-H2, User Manual

Page: 32 / 96

Setup and Calibration 4-3
January 2008
Switching Display
Windows
If multiple XDP display windows have been configured (see Chapter
5,
Advanced Programming , for instructions), the display may easily
be switched between these windows from the within the User
Program . To accomplish this, access the User Program as described
on page 3-4 and proceed as follows:
Note:
As a shortcut, the display windows may be switched from
normal run mode by using the
[
S
] and [
T
] keys.
Note:
Although the digital display can be switched at any time
between alternate inputs, an alarm or a recorder cannot be
switched on the fly to respond to alternate inputs. They must
be specifically configured to accept one input at a time.
Cal Opt Disp Use the [
W
] and [
X
] keys to
select
[Disp]
and press
[ENTER]
.
Cal Opt Disp All available display windows
are listed. Use the [
S
] and [
T
]
keys to select the desired win-
dow and press
[ENTER]
.
1: H2/AIR pcnt
1: H2/AIR mA
Cal Opt Disp Press
[ESC]
to exit the User
Program and return to mea-
surement mode.
1 H2/AIR After pressing
[ESC]
at the pre-
vious prompt, the chosen dis-
play appears.
91.52
pcnt