GE Vscan Extend User Manual Download Page 97

Page: 97 / 251

Settings

Vscan Extend

–

User Manual

4-3

5721203-100

Rev. D

Scan Settings (continued)

Auto Freeze (Probe) - set the auto freeze time.

1. Press

Auto Freeze (Probe)

2. Choose the desired value

3. Press

to set the value

Video Duration - set duration of the captured Cine loops.

1. Press

Video Duration

2. Choose the desired value

3. Press

to set the value

Unit of Measurement - set unit of measurement

1. Press

Unit of Measurement

2. Choose the desired unit

3. Press

to set the value

Set current preset as default

1. Press

Set Current Preset as Default

2. Press

Yes

to set the displayed preset as default.

Server Settings

Allows to configure the DICOM servers.

Figure 4-2.

Server settings

Worklist Server - gets patient and intended study information

Image Server - remote store location for media (video/images)

DICOM Encoding - Choose the desired encoding type and press

Summary of Contents for Vscan Extend



























































































































































































































































Search results

Summary of Contents for Vscan Extend

Reviews:

Related manuals for Vscan Extend

Brands by name

Popular brands

GE Vscan Extend, User Manual

Search results

Summary of Contents for Vscan Extend

Reviews:

Related manuals for Vscan Extend

Brands by name

Popular brands