10.4 Worksheet
All calculation results are recorded in the application dependent patient worksheets. By
pressing Report on the control panel , the Worksheet of the selected Measurement Application
is switched on. (Always starts with the first page of worksheet.) According to the selected
measurement application the worksheets display the results of the calculations, graphs,
growth percentile bars and application dependent information available.
Note
It is now possible to switch between Gyn and OB worksheets (if both worksheets exists).
Note
Display depends on the selected measurement package.
Note
If a patient worksheet contains measurements that were performed in the XTD-View mode (),
a yellow caution symbol will be shown in the worksheet header.
Editing a Worksheet/Report
Any stored measurements in a patient worksheet can be edited. Move the cursor to the
desired field, press
Set
and type in the changes. The edited values are marked with an
asterisk (* next to the changed value). Additionally some parameters or settings can be
changed by clicking into the specific field on the worklist page. For example: Method:
average , minimum, maximum, last or off.
Changing the Measurement Package
1.
To change the measurement package press
Meas Applicat.
.
2.
Select the desired measurement package and press
Return
.
Transferring a Worksheet
Press
Transfer Data
to transfer the patient worksheet data to the selected destination.
Note
If a Structured Report Server exists, the data is transferred using DICOM Structured
Reporting, independent of whether there are other report servers (network, serial) available.
Note
The Transfer Data key can only be selected if a “Service: REPORT” destination is specified in
the System Setup; To specify a DICOM Address:
Note
Receiving Report Data An example for software that can receive and store reports is the “PIA”
documentation system for medical diagnostics and digital image archiving from “ViewPoint”.
(www.viewpoint-online.com)
Printing a Report
1.
Press
Print Preview
to see how the selected content will appear on the report. The
preview can be customized:
1.1.
Select the desired measurement package.
1.2.
Select a
Report Format
:
Standard
,
Compact A
or
Compact B
.
Info
Compact A and Compact B are only available if the check box Use Compact Format is
checked in the Measure Setup.
1.3.
Enlarge or reduce the size of the preview by pressing
Zoom In
or
Zoom Out
if
desired.
1.4.
Print the Report: Under
Print Report(s)
select if the Report should be printed
either for the selected measurement package or for all packages.
2.
Press
Print Report
to print the report.
Saving data as PDF
1.
Select
Export Report
.
Measurements and Calculations
Voluson™ SWIFT / Voluson SWIFT+ Instructions For Use
5831612-100 Revision 4
10-21
Summary of Contents for Voluson Swift
Page 343: ......
