GE Vivid S70, User Manual

Page: 590 / 709

Customize Configuration
12-70
Vivid S70 / S60
–
User Manual
BC092760-1EN 01
Default remote path setting
The user can define a default remote path for a network shared
folder (\\server-name\share-name). The default remote path can
then be selected as a destination archive for the following
operations:
• Export traces function in Q-Analysis
• Export of system error log file
• Export of report templates
• Save as function for images
• Save as function for reports
To define a default remote path:
1. Press Utility / Config on the Touch panel and log on as
administrator if required.
2. Select the Connectivity category and Remote subgroup.
The
Remote
sheet is displayed.
Figure 12-52. The Remote sheet
3. In the
Remote Path
section, enter a remote path of a shared
folder on the network.
To check the connection, press
Check .
4. In the
Configurable Remote path user
section enter the user
name and password required to access the shared folder.