GE Vivid S60N, Basic Service Manual

Page: 244 / 478

D
IRECTION
FR091521, R
EVISION
1 V
IVID
S60N/V
IVID
S70N B
ASIC
S
ERVICE
M
ANUAL
8-14 Section 8-2 - Covers - Replacement Procedures
P R E L I M I N A R Y
8-2-6 Blank Cover Replacement Procedure
Note: The removal and installation procedure for the Blank Cover is the same as that described for
the
DVD and Printer Cover Replacement Procedure section, on page 8-13 in this case making
use of the blank cover.
8-2-6-1 Tools
Phillips screwdriver.
8-2-6-2 Time Required
5 min
8-2-6-3 Preparations
Shut down the Vivid™ S60/Vivid™ S70 ultrasound unit, as described in Power Shut Down on page 4 - 7 .
8-2-6-4 Blank Cover Removal Procedure
Note: The Blank cover is secured to the mechanical platform by 4 snap-lock securing clips on the
inner side of the cover - illustrated below.
1) Remove the right side cover:
2.) Grip the bottom of the cover and pull it towards you to release it from the snap-lock securing clips
( Figure 8-30 ). Remove the cover.
8-2-6-5 Blank Cover Installation Procedure
1) Return the cover to the right of the system, carefully aligning the 4 snap-lock securing clips with the
securing pins.
2.) Push the cover until it clicks in position.
3.) Install the right side cover.
FRU Part #
Refer to
Table 9-8
on page 9-7
.
• Right Side Cover Removal Procedure
Figure 8-8 Removing the Blank Cover
• Right Side Cover Installation Procedure
Securing Clips