GE Vivid S60N, Basic Service Manual

Page: 173 / 478

D
IRECTION
FR091521, R
EVISION
1 V
IVID
S60N/V
IVID
S70N B
ASIC
S
ERVICE
M
ANUAL
Chapter 4 - General Procedures and Functional Checks 4-27
P R E L I M I N A R Y
4-3-5-4 Using Color Mode
4-3-5-4-1 Color 2D
1) From an optimized 2D image, press Color .
2) Use the trackball (assigned function: Pos ) to position the ROI frame over the area to be examined.
3) Press Select . The instruction Size should be highlighted in the trackball status bar.
NOTE: If the trackball control Pointer is selected, press Trackball to be able to select between Position and
Size controls.
4) Use the trackball to adjust the dimension of the ROI.
4-3-5-4-2 Color M-Mode
1) From M-Mode press Color .
2) Use the trackball (assigned function: Pos ) to position the color area in the M-Mode display.
3) Press Select . The instruction Size should be highlighted in the trackball status bar.
NOTE: If the trackball control Pointer is selected, press Trackball to be able to select between Position and
Size controls.
4) Use the trackball to adjust the dimension of the color area.