GE Vivid E9, Service Manual

Page: 647 / 802

GE H
EALTHCARE
D
IRECTION
GA091568, R
EVISION
5 VIVID E9 S
ERVICE
M
ANUAL
Chapter 8 - Replacement procedures 8 - 313
8-14-3-2 Black & White Digital Graphic Printer removal procedure
Follow these steps to remove the Black & White Digital Graphic Printer:
1.) Disconnect the cables from the back of the printer.
2.) Loosen the printer bracket wing nut that secures the printer.
3.) Slide the printer out.
8-14-3-3 Black & White Digital Graphic Printer installation procedure
Follow these steps to install the Black & White Digital Graphic Printer:
1.) Slide the printer into the printer bracket until the face is flush with the VIVID E9.
2.) Tighten the printer bracket wing nut to secure the printer in the printer bracket.
3.) Connect the cables to the back of the printer.
4.) Replace the Left Side Cover.
8-14-4 USB Flash Card replacement
8-14-4-1 Removing the USB Flash Card
1.) Select Utility > Eject. The Eject device menu is displayed.
2.) Select the USB Flash Card.
3.) The selected media is prepared for ejection.
4.) Remove the USB Flash Card.
8-14-4-2 Installing the USB Flash Card
Plug the USB Flash Card into one of the USB ports on the VIVID E9.
Figure 8-257 Black & White Digital Graphic Printer
PRINTER BRACKET
WING NUT