GE Vivid E80, Service Manual

Page: 129 / 382

General procedures
Vivid E80/E90/E95
–
Service Manual
4-5
GC091052 Rev. 3
Power shut down
When you switch off the Ultrasound system, the Ultrasound
system performs an automatic shutdown sequence.
Figure 4-1. The Exit dialogue window
The SYSTEM - EXIT menu, used when switching off the
Ultrasound system, gives you these choices:
• Exit
(Only available when logged in as GE Service with Service
Dongle)
Select this button when you want to exit to the Windows
Desktop.
NOTE: If you need to restart Vivid E80/E90/E95 when logged on to
the Windows Desktop, ensure that you do a complete power
down (Shut Down). This is required to power up the Front
End Processor.
• Logoff
Use this button to log off the current user.
The system remains ON and ready for a new user to log on.
If the Logoff button is dimmed, it indicates that no user is
logged on to the unit at the moment.
• Shutdown
Use this button to shut down the system. The entire system
will shut down. It is recommended to perform a full shutdown
at least once a week.
If the Shutdown button is dimmed, use the key-combination
<Ctrl+Alt+R> to shut down the unit.