48
CONNECTIONS
TV With Audio/Video Jacks and Digital
Satellite Receiver
This connection assumes:
•
You have an advanced digital satellite receiver and your TV
has audio/video input jacks.
This connection provides:
•
Mono sound playback from VCR, recording from receiver while
watching cable or off-air channel, and recording one cable or off-
air channel while watching another.
To use this connection, you must have:
•
(3) coaxial cables and (4) audio/video cables
To connect:
1.
Connect cables as shown.
2.
Return to the
First Things First Section, then follow the
steps.
Using this Connection
•
Tune your TV to its video input to record (or watch) the VCR
or digital satellite receiver.
•
To record from the digital satellite receiver, tune your VCR to
its line input. L1 appears in the display.
To play a tape:
1.
Insert a tape.
2.
If necessary, press VCR and then PLA
Y.
To record one off-air or cable program and watch
another:
1.
Begin recording a program using a recording feature.
2.
Select a different channel on the TV.
To record a digital satellite receiver program and
watch a cable or off-air channel:
1.
Turn on the receiver, tune the VCR to its line input, and begin
recording a program using a recording feature.
2.
Select a different channel on the TV.
SATELLITE SIGNAL
CABLE OR ANTENNA
INPUT 2
VIDEO
R
L/MONO
IN FROM ANT
OUT TO TV
CH3 CH4
LINE 1
AUDIO VIDEO
VHF
UHF
OUT
IN
SATELLITE RECEIVER
VCR
IN FROM ANT
OUT TO TV
CH3
CH4
SATELLITE
IN
S-VIDEO
L
R AUDIO
VIDEO
TV
CABLE/
ANTENNA
INPUT 1
VIDEO
R
L/MONO
S-VIDEO
AUDIO
OUTPUT
R
L
