47
CONNECTIONS
TV With RF Jack and Digital Satellite Receiver
This connection assumes:
•
You have a basic digital satellite receiver and your TV does
not have audio/video input jacks.
This connection provides:
•
Mono sound playback from VCR, recording from a digital
satellite receiver, and recording one off-air or cable channel
while watching another.
To use this connection, you must have:
•
(4) coaxial cables and (2) audio/video cables
To connect:
1.
Connect cables as shown.
2.
Return to the
First Things First Section, then follow the
steps.
Using This Connection
•
Tune your TV to channel 3 or 4, whichever one you selected
with the 3 CH. 4 switch on the back of the VCR.
•
To record and watch off-air or cable, tune your VCR to
channel 3 or 4 whichever one you selected with the 3 CH. 4
switch on the back of the receiver. Turn off receiver.
•
To watch and/or record from the digital satellite receiver,
tune your VCR to its line input. L1 appears in display.
To play a tape:
1.
Insert a tape.
2.
If necessary, press VCR and then PLA
Y.
To record one off-air or cable program and watch
another:
1.
Turn off the digital satellite r eceiver and begin recording a
program using a recording feature.
2.
Press TV•VCR and select a different channel on the TV.
To record a digital satellite receiver program:
1.
Turn on the receiver, tune the VCR to its line input, and begin
recording a program using a recording feature.
SATELLITE RECEIVER
VCR
TV
SATELLITE SIGNAL
CABLE,CABLE BOX OR ANTENNA
IN FROM ANT
OUT TO TV
CH3 CH4
LINE 1
AUDIO VIDEO
VHF
UHF
OUT
IN
IN FROM ANT
OUT TO TV
CH3
CH4
SATELLITE
IN
S-VIDEO
L
R AUDIO
VIDEO
CABLE/
ANTENNA
Caution
The unauthorized recording of
satellite broadcasts, television
programs, or other copyrighted
materials may infringe the rights
of others.
