19
VCR BASICS
holding 1 until 1 – – appears on the screen. Then press the other
two numbers.
PAUSE
Pauses playback or recording. Press PAUSE again to
return to playback or recording.
PLAY
Plays a tape.
RECORD
Starts VCR recording. Also used for Express recording.
REVERSE
Rewinds the tape when the VCR is stopped. Searches
backward through a tape during playback. Starts slow motion
during play-pause and decreases slow-motion speed.
SEARCH
Displays INDEX and GO-TO Search menus on TV screen
when VCR is stopped. Advances the tape 30 seconds of recorded
material during playback. Each press advances the tape an
additional 30 seconds up to five minutes.
SPEED
Selects a recording speed (SP or EP).
STOP
Stops the current VCR function such as record, playback,
rewind, or fast forward.
TRACKING Up or Down
Lets you manually reduce the streaks
that may appear on the picture during play, slow motion, or
pause. Reduces picture “jitter” during stop-action playback.
TV•VCR
Switches the picture signal so that it either comes from
the VCR or cable/antenna system.
TV Function Buttons
CHAN Up or Down
Selects next higher or lower channel in the
V’s channel memory.
CLEAR
Removes menus or status displays from the screen.
GO BACK
Switches between two channels. Select one channel
nd then select another using the number buttons. Press GO
ACK to switch between the two channels.
INFO
Shows the TV’s status displays on the TV screen.
INPUT
Selects between the TV’s input channel or tuner. Press to
ee the VCR signal if you connected your VCR using the
UDIO/VIDEO jacks.
MUTE
Reduces volume to minimum level.
Numbers (0 through 9)
Select a channel up to 99 by pressing
wo numbers. Select a cable channel over 99 by pressing and
olding 1 until 1 – – appears on the screen. Then press the other
wo numbers.
TV Buttons
The TV buttons may not control all
features of all models of RCA, GE, or
PROSCAN TVs.
If you have trouble getting a picture
on the TV screen, refer to “How to
Find Your TV’s Video Input Channel”
in the
Reference section of this
manual.
