GE Venue Fit Technical Publication Download Page 189

Page: 189 / 300

DIRECTION 5854713-100, REVISION 2

VENUE FIT™ SERVICE MANUAL

7-12

Chapter 7 - Diagnostics/Troubleshooting

P R E L I M I N A R Y

7-4-4-2

Software Status

Use

Software Status

to view general information about the software installed on the system.

Note:

The information on

Software Status

is available to all service class licenses.

Figure 7-13 Software Status

The following table lists all the elements available on

Software Status

section.

Table 7-28 Software Status

Element

DESCRIPTION

System Date

Current date in the format: <day>, <month> <year>.

System Time

Local time based on the last time the system desktop was refreshed in
the format <hh:mm:ss>.

Application Installation Date

Date the application software was installed.

Base Image Installation Date

Date the base image software was installed. The base image software
includes the operating system and other supporting software.

Base Image Version

Version number of the base image software.

Application Software Version

Version number of the application software.

Application Status

Status of the application. Valid values are
• Running
• Stopped

Summary of Contents for Venue Fit













































































































































































































































































































Search results

Summary of Contents for Venue Fit

Reviews:

Related manuals for Venue Fit

Brands by name

Popular brands

GE Venue Fit, Technical Publication

Search results

Summary of Contents for Venue Fit

Reviews:

Related manuals for Venue Fit

Brands by name

Popular brands