GE UTX878 Ultrasonic, User Manual

Page: 34 / 103

March 2004
2-10 Programming Site Data
Entering the Pipe
Material (cont.)
6. If you have selected certain materials (such as carbon or stainless
steel, cast iron, PVC and CPVC), the UTX878 offers the option of
entering the pipe dimensions by a standardized schedule. (This
option does not appear unless you have selected one of these
materials; if you have, proceed to step a below.) Once you enter
the nominal pipe size and schedule number, the UTX878
determines the OD and wall thickness from an internal table.
a. Scroll to the Schedule option, and press [ENT].
b. A list of pipe sizes opens, from 15 to 200 mm (0.5 to 8 in.).
Scroll to the desired pipe size, and press [ENT].
c. A list of schedules opens. Scroll to the desired schedule, and
press [ENT].
You have finished entering the pipe parameters. Press [ESC] until
you return to the
Pipe Material/Lining window, or continue pressing
[ESC] to return to the data display window.