background image

X. 

FCC Compliance Statement 

This equipment has been tested and found to comply with the limits for a Class B digital device, 

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable 

protection against harmful interference in a residential installation. This equipment generates, 

uses and can radiate radio frequency energy and, if not installed or used in accordance with the 

instructions, may cause harmful interference to radio communications. However, there is no 

guarantee that interference will not occur in television reception, which can be determined by 

turning the equipment off and on, the user is encouraged to try and correct the interference by 

one or more of the following measures: 

(1)  Reorient or relocate the receiving antenna. 

(2)  Increase the separation between the equipment and the receiver. 

(3)  Connect the equipment into an outlet on a circuit different from that to which the 

receiver is connected. 

(4)  Consult the dealer or an experienced radio/TV technician for help. 

 

FCC WARNING:

 

Changes or modifications not expressly approved by the party responsible for compliance could 

void the user’s authority to operate the equipment. 

 18 

Summary of Contents for USB 2.0 7-Port Hub HO97916




















Reviews: