GE T8, Basic Service Manual

Page: 168 / 349

General Procedures and Functional Checks
4-10 Vivid T9/Vivid T8 – Basic Service Manual
5795591-100 English Rev. 3
4-2-5 Logging on to Vivid T9/Vivid T8 as “ADM”
Select Utility tab on the touch screen, then select Config .
It will bring up the Operator Login dialog where you must log
on.
Figure 4-2. Operator Login Window
1. Operator : Select the operator.
2. Password : Enter Operator’s password (optional).
3. Select the type of Login or Cancel.
• Emergency : Stores data only from current patient
examination.
• OK : Standard login.
• Cancel : Cancel login.
As default, two users are defined, USR and ADM.
• USR
If you log on as USR, you will have access to do set-up tasks
that a user may need to do during daily use.
As default, no password has been set for USR . Just type the
name USR , and select Login .
• ADM
If you log on as ADM , you will have access to do general set-up,
service adjustments, adjust network and connectivity settings.
As default, the password for ADM is ulsadm .
Select the name ADM , the password ( ulsadm ) and select
Login .
It is possible for the administrator ( ADM ) to establish new users
and set unique passwords for each user, including a new
password for ADM. If the login as ADM fails, contact the
responsible person in the hospital to get access.