Solver
PROBLEM
OVEN
COME ON
CONTROL PANEL
LIGHTED, YET OVEN
WILL NOT START
FOODS ARE EITHER
OVERCOOKED OR
UNDERCOOKED
POSSIBLE CAUSE AND REMEDY
A fuse
in your home may be blown or the circuit breaker tripped. Replace fuse
circuit breaker.
Unplug your microwave
plug it back in.
Make
sure 3-prong plug on
is fully inserted into wall receptacle.
●
Door not securely closed.
●
START must be touched after entering cooking selection.
Another selection entered already in oven and CLEAR/OFF not touched to cancel
●
Make sure you have entered cooking time after touching TIME COOK I & 11.
CLEAR/OFF was
Reset cooking
and touch START.
●
times
because
food density or amount
of foods in
Touch TIME COOK I & and
cooking time for completion.
.
entered. Check cooking guide for recommended power
or changing
levels
cooking if necessary.
Dish
turned or
dishes require specific instructions.
Check cooking guide or recipe for instructions.
●
Too many dishes in
at
time. Cooking time must be increased when cooking
more than one food item. Check cooking guide time recommendations.
All These
Are Normal
with your
Oven:
●
Steam or vapor escaping from
around the door.
. Light reflection around door or
outer case.
. Dimming oven light and change
in blower sound may occur while
operating at power levels other
than high.
●
Dull thumping sound while oven
is operating.
●
Some TV-Radio interference
might be noticed while using your
microwave oven. It’s similar to the
interference caused by other small
appliances and does not indicate a
problem with your oven.
If you need more help.. call, toll free:
The GE Answer Center”
800.626.2000
consumer information service
28
Summary of Contents for Spacemaker II JEM20H
Page 30: ...30 ...
Page 31: ...Noks 31 ...