GE Healthcare
Senographe DS
Revision 1
Service Information and Procedures Class A 2385072-16-8EN
Job Card DIAG A003 - AWS File System and SCSI Board Diagnostics
Page no. 989
Chapter 9
JC-DIAG-A-003.fm
Job Card DIAG A003 - AWS File System and SCSI Board Diag-
nostics
Chapter 9
1
INTRODUCTION
This Job Card describes diagnostic procedures for the AWS (Acquisition Workstation) File system and
SCSI board.
The AWS consists of a Solaris computer, some components connected externally (e.g., modem) and a
set of subsystems. AWS diagnostics include diagnostics for the workstation hardware, software pro-
cesses in the workstation, and connection to the subsystems.
The diagnostics tests the AWS hardware components, locates any non-functional subsystem, and then
locates a non-functional FRU (Field Replaceable Unit).
1-1
Access to the Tests
There are two ways to launch an AWS diagnostic:
•
From a command window as
sdc
or
root
user (local use only)
•
From the
ok
prompt (local use only)
2
COMMON PROCEDURES
2-1
Open a Command Window
Right click the screen background; select
Service tools
and then select
Command window
from root
menu.
2-2
Go to
ok
Prompt
Note:
Going to the
ok
prompt is only applicable to V1/V2 Control Stations.
1. From behind the Browser, launch a command window (see
Launching a Command Line Window
A command window appears with an ADS prompt.
2. Log in as root as follows:
a. At the ADS prompt enter:
su
b. When requested to specify the root password, enter:
operator
3. Execute the halt command by entering:
halt
An
ok
prompt appears.
