GE SEER Light, Service Manual

Page: 14 / 86

1-8 SEER Light Ambulatory Recorder/Controller Revision B
2019818-008
Introduction: Safety Information
guidelines regulating the disposal of such products. If you
have questions concerning disposal of the product, please
contact GE or its representatives.
MODIFICATIONS — Do not make any modifications to
the device.
AFTER DEVICE USE — Clean the device after each use
to ensure trouble-free operation for the next use.
‹ Use a piece of damp cloth with alcohol to clean the
device and the patient cable.
‹ The device cannot be sterilized.
‹ Do not use xylene and petrol related liquid for
cleaning the device.
‹ To ensure proper operation of the device, it is
necessary to periodically have the device checked by
authorized service personnel.
‹ Check the patient cable and connectors every month
by connecting them to an ECG simulator.
INSTALLATION — Adhere to the following
recommendations during installation:
‹ Install and keep device away from splashing water.
‹ Do not install the device where it may be affected by
humidity, ventilation, direct sunlight, air
conditioning, dust, salt, sulfur, etc.
‹ Prevent the device from tilting, and protect it from
the possibility of vibration or shock.
‹ Do not install the device in a chemical storage area or
where gas is generated.
Serial Number
Every GE Medical Systems Information Technologies device has a
unique serial number for identification. The serial number appears on
the device label similar to the one shown below.
50A