Using the Apple iOS App
2067634-077 Revision B
SEER™ 1000
63
Add or Select a Patient
1.
To add a new patient, touch
Add Patient
.
2.
Enter the patient demographic data in the
Add Patient
window.
You have to enter at least the
Patient ID
.
3.
Touch the
Continue
button.
Find Device
After selecting a patient, you will be taken to the
Find Device
screen.
1.
If the recorder is not turned on, press the
Event Button
until you
hear a beep to switch on the recorder.
2.
Touch
Find Device
.
The recorder identifier will appear in the
Select An Accessory
window.
NOTE
The time it takes to find a device can vary from a few sec-
onds to several minutes depending on the number of Blue-
tooth devices in the area and on other electronic conditions.
3.
Touch the identifier to select the recorder.
