2.7 Edit a protocol
Use this procedure to change the established user protocols on the system.
NOTE:
GE Reference protocols are read-only and cannot be edited.
1. From the image monitor, click .
2. Click
Protocol Management
, then click
Protocol Management
again.
3. From the
CT Login
authentication window, enter your
Log On Name
and
Password
.
4. From the
Protocol Selection
window, select the protocol category from the drop-down menu.
○
There is space for 90 protocols in each adult anatomical area.
○
If you wish to edit pediatric protocols, click
Pediatric
.
○
For color coded pediatric anatomical areas, there is space for 90 protocols in each of the
different weight classifications.
NOTE:
Head
,
Orbit
, and
Miscellaneous
are not color coded.
5. Select an anatomical body part.
6. Scroll through the protocol list to find the desired protocol, or use the search bar.
7. Select a protocol you wish to edit.
8. Click [Edit] if you are making changes to an existing protocol.
9. From the
Scan Settings
window, modify the protocol parameters as needed.
10. Click [Changes Complete], then [Save].
11. To save the edited parameters as a new protocol, click [Save As] to open the
Protocol Save
window.
Revolution CT User Manual
Direction 5480385-1EN, Revision 1
Chapter 18 Protocols
579
