GPS Grandmaster Clock
70
RT430-TM-EN-5
Figure 38: Navigating the unit's local monitoring display
5.2
Remote Access (Interface Web)
RT430 has a Web Interface that allows monitoring the unit status in real time and checking general system
information.
To connect to the Web Interface, enter the unit E
THERNET
port IP address into the address field of a web
browser. For information about factory default for E
THERNET
port, see
Chapter 3
If the unit is not using
factory default settings, see
Section 5.1.2
for instructions to obtain the current IP address.
A start page containing the unit status information opens once you access the Web Interface. The remaining
monitoring and configuring sections are on a menu on the left. To access them, click the desired menu item.
The configuring sections are:
Status: monitoring the status of the unit in real time.
General Information: information of the unit system.
5.2.1
Monitoring equipment status
The section S
TATUS
of Web Interface, shown in
allows monitoring status information of the unit in
real time.
