GE Reason H49
Technical Manual
H49/EN M/C22
59
7.4.1
System
The
System
section provides the current configuration of the Reason H49 switch
together with its status.
It also allows the user to update the main system attributes.
7.4.1.1
Status
To get the global status of the Reason H49 switch, click
Status
in the
System
section:
The top part of the page shows the following information:
Attribute
Description
Redundancy mode
Selected redundancy mode
IP address
Device’s IP address
MAC address
Device’s MAC address
Date & Time
Device’s clock date and time
Uptime
Elapsed time since last reboot
Firmware Version
Version of the firmware currently running on the device
LED Chaser
The LED chaser of the H49 is a function used to identify correctly a given device
amongst others.
It consists in sequentially lighting all the LEDs in the front panel one after the other,
eight at a time.
•
Click
Enable LED Chaser
to activate the LED chaser and make the device’s LEDs
blink in sequence.
•
Click again to stop the
LED chaser
(Disable LED Chaser button), or press the “C”
button on the device front panel.
Alternatively, the LED chaser can be stopped by pressing the “C” button in the front
panel.
Supply Status
This area shows information about the input voltage sources (Primary voltage
source/Secondary voltage source):
Figure 37: H49 Web User Interface – Power Supply Status
Summary of Contents for Reason H49
Page 10: ...Technical Manual GE Reason H49 10 H49 EN M C22 1 2 Ordering Options ...
Page 157: ......
