4.6
Installing and Replacing the Battery
Warning
Batteries may present a risk of fire, explosion, or
chemical burn if mistreated. Do not crush, disassemble,
short-circuit, or dispose of in fire.
Use of batteries not specified for use with the
QuickPanel
+
product may present a risk of fire or
explosion.
Warning
Do not recharge, disassemble, heat or incinerate lithium
batteries.
Dispose of lithium batteries in accordance with federal,
state, and local regulations. Be sure to consult with the
appropriate regulatory agencies before disposing of
batteries.
Caution
1) Replacing the battery should only be performed by
trained personnel and in a non-hazardous location.
2) If the QuickPanel
+
Operator Interface is VESA
mounted, detach from the VESA arm when replacing
the battery.
3) The battery should only be replaced when the unit is
powered off.
4) Care should be taken to protect and insert the battery
with correct polarity.
5) Do not use any metallic item to remove the battery
(such as screwdrivers, knives, pliers, and so forth).
6) Be careful to not drop the battery or any associated
screws into the unit.
7) Be careful of edges on internal sides of the enclosure
and frame.
34
GFK-2847F
Qui Operator Interface User Manual
For public disclosure
Summary of Contents for QuickPanel+
