3.7
HTTP Server
The HTTP server included with the QuickPanel
+
supports standard (RFC 2616). The
HTTP server is configured with the Quick Panel+ Setup Tool. By default, the server is not
enabled. Once enabled, a background program will run, waiting for clients to connect.
The default web page is located in
\Windows\www\wwwpub
on the QuickPanel
+
Operator
Interface.
The server supports non-secure port 80 operation.
Note
If the server status is changed, the QuickPanel
+
must be re-booted before changes
take effect.
3.8
SNTP Server
The SNTP server included with the QuickPanel
+
supports SNTP Version 4 for IPv4, IPv6
and OSI. The SNTP server is configured with the Quick Panel+ Setup Tool. By default,
the server is not enabled. Once enabled, the server will refresh the time specified in the
setup tool configuration. Pressing the
Update Now
button immediately obtains the time
from the configured time server.
The SNTP server supports non-secure UDP port 123 operation.
Software
GFK-2847F User Manual 25
For public disclosure
Summary of Contents for QuickPanel+
