GE QuickPanel Plus IC755CxS06RDx, User Manual

Page: 95 / 112

6.5.2 Memory Allocation Modification
➢ ➢
To change the memory allocation
1. From the Control Panel, double-tap
System
to display the System Properties
window.
2.
From the Memory tab, drag the slider bar to divide into Storage and Program
memory. The amount of memory allocated to and used by each area is displayed in
the window. The blue slider bar indicates the current amount of unallocated SDRAM
and determines the boundaries within which the slider can move.
System Memory Slider Bar
Note Storage memory is limited to a maximum of 128 MB. Using the slider bar to
increase storage memory will provide more RAM-based storage in the folder \Object
Store .
3. Tap
OK
to apply the new setting.
4.
Run the Backup Utility to save the settings.
Operation GFK-2847Q 95
For public disclosure