GE QuickPanel Plus IC755CxS06RDx, User Manual

Page: 101 / 112

Appendix A Product Certifications and
Installation Guidelines
The QuickPanel + Operator Interface is intended for use in industrial environments and,
when properly installed, shall comply with the agency approvals listed in this document.
Agency Approvals
Note
The agency approvals listed in the following table and on the Declaration of
Conformities are believed to be accurate; However, the product’s agency approvals
should be verified by the marking on the unit itself.
Description Agency Marking
Comments
N.A. Safety for Programmable Controller for use in
Hazardous locations
Class I Division 2 Groups A, B, C, D (applicable to
7'', 10'', 12'', and 15” Display units)
Class I Division 2 Groups A, B, C, D; Class 2
Division 2 Groups F, G; Class 3 Division 1 and
Division 2 (applicable only to 6'' Display unit)
Certification by Underwriter's Laboratories to UL
61010-1; UL61010-2-201;
CSA C22.2 No 142 – M1987; CSA 61010-1; CSA
61010-2-201
ISA 12.12.01 standard and CSA C22.2 No
213-M1987
Explosive Atmospheres Directive European
Safety for Hazardous Areas
Equipment Group II, Category 3, Gas Groups IIC,
Dust Group IIIC
Protection string: II 3 G Ex nA IIC T4 Gc
II 3 D Ex tc lllC T100°C (212 °F) Dc
Tamb 0 to 55°C (32 to 131 °F)
Certification in accordance with the ATEX Directive
94/9/EC with an Independent 3rd Party
Assessment Certificate only applies to the 12” and
15” Display units: EN 60079-0/A11,
EN 60079-15, and EN 60079-31;
Part numbers IC755CxS12CDBCA and
IC755CxS15CDACA
Electromagnetic Compatibility Directive
European Electromagnetic Compatibility (EMC)
for Industrial Control Equipment
Self-declaration in accordance with European
Directives EN61000-6-2, EN61000-6-4
Maritime Society Certification No Marking
Det Norske Veritas (DNV) certification only applies
to QuickPanel + 7'' Display unit (part number
IC755CSW07CDACA)
Appendix A Product Certifications and Installation Guidelines GFK-2847Q 101
For public disclosure