background image

Installation
Instructions

DECORATOR PANEL KIT
PSPK25D (WW, BB, CC, SS)

USE WITH: GE Models PSH25MG, PSH25NG and PSH25PG

If you have questions, call 800.GE.CARES (800.432.2737) or visit our website at: www.ge.com

WATER

RESET WATER FILTER

LIGHT

DOOR ALARM

LOCK CONTROL

CRUSHED

CUBED

QUICK ICE

PSPK25DM

3 Corrugated Panels

3 Decorator Panels

Summary of Contents for PSPK25D WW

Page 1: ...SS USE WITH GE Models PSH25MG PSH25NG and PSH25PG If you have questions call 800 GE CARES 800 432 2737 or visit our website at www ge com WATER RESET WATER FILTER LIGHT DOOR ALARM LOCK CONTROL CRUSHED CUBED QUICK ICE PSPK25DM 3 Corrugated Panels 3 Decorator Panels ...

Page 2: ...P 3 TIGHTEN THE 2 SCREWS ON THE TOP TRIM EACH DOOR STEP 4 INSTALL THE SIDE TRIM Do not remove the protective film on the outside of the side trim until the side trim is installed Fit the bottom of the side trim under the bottom trim as illustrated Hold the side trim against the front face of the panels and fit the side trim under the top trim Make sure the side trim is fitted correctly before pull...

Page 3: ...re fitted properly install the Handle and Top Trim STEP 1 SLIDE THE KEYHOLE SLOTS ON THE HANDLE DOWN ONTO THE BUTTONS MOUNTED TO THE FACE OF THE DOOR Slide the Handle downward until the bracket at the top of the Handle fits flush on the top of the door STEP 2 REPLACE THE 2 SCREWS IN THE BRACKET THAT ATTACHES THE HANDLE TO THE TOP OF THE DOOR AND TIGHTEN THE SCREWS TO 45 IN LBS TORQUE CARE OF PANEL...

Page 4: ... with decorator door panels To prevent the refrigerator from tipping over you must do one of the following Install the refrigerator in an alcove or wall recess with a soffit height of 72 1 4 1835 mm Install a 2 x 4 wood block the full width of the refrig erator Secure the block with a minimum of three 3 wood screws penetrating at least 3 4 19 mm into wall studs ...

Reviews: