GE Profile PVM9005SJSS Dimensions And Installation Information Download Page 1

Listed by 

Underwriters 

Laboratories

PVM9005SJ 

GE Profile

 Series 2.1 cu. ft. Over-the-Range Sensor Microwave Oven

Specification Revised 1/16

NOTE:

 Requires 120V grounded outlet. Electrical receptacle 

must be located in cabinet above microwave oven. No additional 

wiring, venting or cabinet rebuilding necessary in many cases. 

Complete detailed, easy-to-follow installation instructions and 
convenient full-size templates are packed with the Spacemaker 

microwave oven.

IMPORTANT INFORMATION:

 When installing the microwave 

oven over a range, allow minimum of 2" from bottom of microwave 
oven to top of range backguard to allow for removal of  

light covers.

VENTILATION OPTIONS:

 The microwave ovens are designed 

for adaptation to the following three types of ventilation: 

• Outside exhaust (vertical – as shown)

 

• Outside exhaust (horizontal)

 

• Recirculating (non-vented ductless – see Filter Kit drawing)

INSTALLATION INFORMATION: 

This information is 

not intended to be used for installing unit described. Before 
installing, consult installation instructions packed with product/
kit for current dimensional data.

66" MIN.

Mounting

height

from

floor

30"

MIN.

width 

required

Exhaust outlet

connects to

3-1/4" X 10" duct

17-1/8"

(rear)

100°

Door open

(without obstruction)

16-5/32"

30

"

16-1/2"

29 15/16"

Minimum distance from

door hinge side to

adjacent wall should

equal 3/4 inch.

14 5/8"

MAX.

11 1/2"

MIN.*

*Maximum depth

with JX15

Bump Out Kit is 16".

Bump Out Kit

sold separately.

DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES) 

For answers to your Monogram, GE Café

 Series, GE Profile

 Series or 

GE Appliances product questions, visit our website at geappliances.com 
or call GE Answer Center

®

 Service, 800.626.2000.

Reviews: