11
Safety Instructions
Operating Instructions
Care and Cleaning
Tr
oubleshooting T
ips
Consumer Support
BAKE Pad
Touch to select the bake function.
BROIL HI/LO Pad
Touch to select the broil function.
OVEN LIGHT Pad
Touch to turn the oven light on or off.
SELF CLEAN LO/STD Pad
Touch to select self-cleaning function.
See the
Using the self-cleaning oven
section.
START Pad
Must be touched to start any cooking or
cleaning function.
Number Pads
Use to set any function requiring numbers
such as the time of day on the clock, the
timer, the oven temperature, the internal
food temperature, the start time and
length of operation for timed baking
and self-cleaning.
CONTROL LOCK-OUT
The control lock-out is
9
and
0
. Touch and
hold the
9
and
0
pads at the same time for
3 seconds.
CLEAR/OFF Pad
Touch to cancel
ALL
oven operations except
the clock, timer and control lock-out.
KITCHEN TIMER ON/OFF Pad
Touch to select the timer feature.
CLOCK Pad
Touch before setting the clock.
DELAY START Pad
Use along with
COOKING TIME
or
SELF CLEAN
LO/STD
pads to set the oven to start and stop
automatically at a time you set.
COOKING TIME Pad
Touch and then touch the number pads to set
the amount of time you want your food to
cook. The oven will shut off when the
cooking time has run out.
Display
Shows the time of day, oven temperature,
whether the oven is in the bake, broil or
self-cleaning mode and the times set for
the timer or automatic oven operations.
If “F– and a number or letter” flash in the display
and the oven control signals, this indicates a
function error code.
Touch the
CLEAR/OFF
pad.
Allow the oven to cool for one hour. Put the oven back
into operation. If the function error code repeats,
disconnect the power to the oven and call for service.
If your oven was set for a timed oven operation
and a power outage occurred,
the clock and all
programmed functions must be reset.
The time of day will flash in the display when
there has been a power outage.
ge.com (U.S.)
www.GEAppliances.ca (Canada)
Oven Control, Clock and Timer Features and Settings