JKP56AAAA - GE Profile
™
27" Double Wall Oven
TM
Specification Revised 6/99
Dimensions (in inches)
10
Locate
junction box
for 27"models
either 5" MIN.
below cutout
floor or 56"
MIN. above
cutout floor
Allow 3/4"
for overlap
over all edges
of cutout
A
Recommended
cutout location
from floor
D
E
2" X 4" or
equiv. runners
(cutout floor)
20" MIN.
door opening
allowance
B
C
H
F
G
Locate
junction box
for 24"models
56" MIN. above
cutout floor
Conduit
(49" long
JK950,
JKP56/45/27,
48-1/2" long
JRP24)
Cut Opening
in Solid
Bottom
10
Note: If a solid
bottom is used
instead of the
runners, a 6" x 10"
rectangle must be
cut out of the
bottom for optimum
performance
and proper air
circulation.
6
6
R
Listed by
Underwriters
Laboratories
For answers to your Monogram,
®
GE Profile Performance Series,
™
GE Profile
™
or GE appliance questions, call
GE Answer Center
®
service, 800.626.2000.
Installation Information:
Before installing, consult installation instructions
[Pub. No. 31-10200] packed with product for current dimensional data.
Cabinet
JKP56
A – Cabinet Width Required
27" min
B – Minimum Cabinet Depth
23-5/8"
C – Minimum Opening Width
25"
D – Opening Height
49-1/2" min.
E – Minimum Cutout Location from Floor
13-1/4"
Oven
F – Overall Depth
23-5/8"
G – Overall Height
51-1/8"
H – Overall Width
26-5/8"
Note:
Cabinets installed adjacent to wall ovens must have an adhesion spec
of at least 194°
KW Rating
240V
6.8
208V
5.1
Breaker Size
30 Amps
†
†
Note:
Check local codes for required breaker size.
