manualshive.com logo in svg

GE Precision 500D, Operator'S Manual

The GE Precision 500D Operator's Manual is available for free download on manualshive.com. This comprehensive manual provides detailed instructions and guidance on operating and maintaining the GE Precision 500D equipment. Get your manual today and explore the full potential of your product!

Share
Download
background image

om 5184516-100 Rev. 5

10-6

Exposures should not be made with the Bucky in any other position as this may
result in a degradation of image quality and loss of Bucky functionality.

ILLUSTRATION 10-4

BUCKY ROTATION

3-5Bucky Angulation

Bucky angulation range varies from –20° to 90°. Refer to 

ILLUSTRATION 10-5

.

Angulation position is held by an electro-mechanical detent lock, located behind
the Bucky in the Bucky support assembly. The detent lock latches the Bucky in
position in 5° increments. To change Bucky angulation, press one of the angula-
tion lock pushbuttons on either side of the Bucky support assembly and move the
Bucky to the desired position.

WHILE EXPOSURES WITHIN 30° OF THE 0° AND 180° POSITIONS ARE
NOT RECOMMENDED, THE BUCKY WILL FUNCTION IN THIS RANGE.
A DEGRADATION IN IMAGE QUALITY MAY RESULT, HOWEVER.

FOR 

TRAINING 

PURPOSES 

ONLY! 

NOTE: 

Once 

downloaded, 

this 

document 

is 

UNCONTROLLED, 

and 

therefore 

may 

not 

be 

the 

latest 

revision. 

Always 

confirm 

revision 

status 

against 

a 

validated 

source 

(ie 

CDL).

Summary of Contents for Precision 500D




































































































































































































































































































































Reviews:

No comments

Related manuals for Precision 500D

Bacharach 100 Operation & Maintenance Manual preview
100
Brand: Bacharach Pages: 64
3M Workstation Monitor 724 Instructions Manual preview
Workstation Monitor 724
Brand: 3M Pages: 21
3M SE-400 Series Getting Started preview
SE-400 Series
Brand: 3M Pages: 2
3M SD-200 Quick Start preview
SD-200
Brand: 3M Pages: 2
3M Dynatel 965AMS User Manual preview
Dynatel 965AMS
Brand: 3M Pages: 24
3M Dynatel 2250M Quick Manual preview
Dynatel 2250M
Brand: 3M Pages: 2
3M SoundPro SE Series Data Addendum Manual preview
SoundPro SE Series
Brand: 3M Pages: 293
CAENels CT-BOX User Manual preview
CT-BOX
Brand: CAENels Pages: 75
LaMotte SMART3 Quick Start Manual preview
SMART3
Brand: LaMotte Pages: 2
Lampa 38862 Manual preview
38862
Brand: Lampa Pages: 12
Underground Magnetics Mag 3 Operator'S Manual preview
Mag 3
Brand: Underground Magnetics Pages: 48
GTR TACHO Instruction Manual preview
TACHO
Brand: GTR Pages: 8
AXE MM2 Series Operation Manual preview
MM2 Series
Brand: AXE Pages: 5
BUSCH VACTEST GCD 200 Instruction Manual preview
VACTEST GCD 200
Brand: BUSCH Pages: 12
Fluke 3210-PR Instruction Sheet preview
3210-PR
Brand: Fluke Pages: 5
PCE Health and Fitness PCE-666 User Manual preview
PCE-666
Brand: PCE Health and Fitness Pages: 4
PCE Instruments PCE-PHD 1 Manual preview
PCE-PHD 1
Brand: PCE Instruments Pages: 20
Skil ME9821-00 Owner'S Manual preview
ME9821-00
Brand: Skil Pages: 80

Brands by name

Popular brands

Load more brands