manualshive.com logo in svg

GE Precision 500D, Operator'S Manual

The GE Precision 500D Operator's Manual is available for free download on manualshive.com. This comprehensive manual provides detailed instructions and guidance on operating and maintaining the GE Precision 500D equipment. Get your manual today and explore the full potential of your product!

Share
Download
background image

om 5184516-100 Rev. 5

8-14

ILLUSTRATION 8-12

AUTOMATIC COLLIMATOR LAMP LOCATION

Switch off the system.
Remove two Allen head screws on lamp housing.
Remove lamp housing.
Remove the two Allen contact screws on the lamp.
Replace the halogen bulb.
Do not touch new lamp with your bare fingers.
Screw the two Allen contact screws tight.
Mount lamp housing and fasten it by re–tightening both screws.

 

IF THE HALOGEN LAMP OF THE LIGHT LOCALIZER REMAINS
ILLUMINATED FOR A LONGER PERIOD OF TIME, THE HOUSING MAY
HEAT UP. PLEASE AVOID TOUCHING THE LAMP HOUSING TO
PREVENT BURNS.

ALWAYS USE OEM REPLACEMENT LAMPS FOR THE LIGHT
LOCALIZER. HALOGEN LAMPS, WHICH ARE NOT SHORT–CIRCUIT–
PROOF, MAY BREAK AND RESULT IN INJURIES CAUSED BY
BROKEN GLASS. LAMP TYPE DESCRIPTION: LOOK AT THE LABEL
AT THE BACKSIDE OF THE COLLIMATOR.

LAMP HOUSING

TWO ALLEN 
HEAD SCREWS

FOR 

TRAINING 

PURPOSES 

ONLY! 

NOTE: 

Once 

downloaded, 

this 

document 

is 

UNCONTROLLED, 

and 

therefore 

may 

not 

be 

the 

latest 

revision. 

Always 

confirm 

revision 

status 

against 

a 

validated 

source 

(ie 

CDL).

Summary of Contents for Precision 500D




































































































































































































































































































































Reviews:

No comments

Related manuals for Precision 500D

ABQ Industrial TI-25MX Instruction Manual preview
TI-25MX
Brand: ABQ Industrial Pages: 15
ABQINDUSTRIAL HT-4000 User Manual preview
HT-4000
Brand: ABQINDUSTRIAL Pages: 3
C-LOGIC 8900 Instruction Manual preview
8900
Brand: C-LOGIC Pages: 4
C-lock GreenFeed Instruction Manual preview
GreenFeed
Brand: C-lock Pages: 32
C-LOGIC 8730 Instruction Manual preview
8730
Brand: C-LOGIC Pages: 12
Callaway 200 S Manual preview
200 S
Brand: Callaway Pages: 11
FARMSCAN Jackal v2 Manual preview
Jackal v2
Brand: FARMSCAN Pages: 28
Keithley 236 Service Manual preview
236
Brand: Keithley Pages: 138
GANN HYDROMETTE BL Compact TF-IR 2 Operating Instructions Manual preview
HYDROMETTE BL Compact TF-IR 2
Brand: GANN Pages: 40
Gamry Reference 3000 Quick Start Manual preview
Reference 3000
Brand: Gamry Pages: 16
National Instruments NI 9421 Getting Started Manual preview
NI 9421
Brand: National Instruments Pages: 18
Oakton PH550 Instruction Manual preview
PH550
Brand: Oakton Pages: 16
Flytec Element Track Quick Manual preview
Element Track
Brand: Flytec Pages: 2
CA.MI T-PLUS User Manual preview
T-PLUS
Brand: CA.MI Pages: 68
Jenoptik LDM51 Series Operating Manual preview
LDM51 Series
Brand: Jenoptik Pages: 54
Icon Process Controls Level Pro UltraPro 500 Series Instruction Manual preview
Level Pro UltraPro 500 Series
Brand: Icon Process Controls Pages: 19
KROHNE OPTIFLUX 4040 C Series Supplementary Instructions Manual preview
OPTIFLUX 4040 C Series
Brand: KROHNE Pages: 20
Sur-Gard SG-System 5 Installation Manual preview
SG-System 5
Brand: Sur-Gard Pages: 12

Brands by name

Popular brands

Load more brands