GE PQMII, Instruction Manual

Page: 168 / 216

6–30 PQMII POWER QUALITY METER – INSTRUCTION MANUAL
CHAPTER 6: MONITORING
6.5 A4 Product Info
6.5.1 Software Versions
PATH: ACTUAL VALUES
Ö
A4 PRODUCT INFO
ÖØ
SOFTWARE VERSIONS
Product software revision information is contained in these messages.
•
MAIN PROGRAM VERSION : When referring to documentation or requesting technical
assistance from the factory, record the
MAIN PROGRAM VERSION
. This value identifies
the firmware installed internally in the flash memory. The title page of this instruction
manual states the main program revision code for which the manual is written. There
may be differences in the product and manual if the revision codes do not match.
• BOOT PROGRAM VERSION : This identifies the firmware installed internally in the
memory of the PQMII. This does not affect the functionality of the PQMII.
6.5.2 Model Information
PATH: ACTUAL VALUES
Ö
A4 PRODUCT INFO
ÖØ
MODEL INFORMATION
Product identification information is contained in these messages.
•
ORDER CODE : This indicates which features were ordered with this PQMII. T =
Transducer option (T20 = 4-20 mA, T1 = 0-1 mA Analog Outputs), C = Control option, A
= Power Analysis option.
• CPU SPEED : Newer hardware revisions support the 25 MHz CPU speed, while older
revisions only support 16 MHz. Certain features are only available on the 25 MHz
platform (such as the Voltage Disturbance Recorder).
• MOD NUMBER(S) : If unique features have been installed for special customer orders,
the
MOD NUMBER
will be used by factory personnel to identify the matching product
„
SOFTWARE [
Z
]
VERSIONS
MAIN PROGRAM VER:
2.22 MAY 09, 2006
MESSAGE
BOOT PROGRAM VER:
3.00
„
MODEL [
Z
]
INFORMATION
ORDER CODE:
PQMII-T20-C-A
MESSAGE
CPU SPEED:
25 MHz
MESSAGE
MOD NUMBER(S): 000
MESSAGE
SERIAL NUMBER:
C7387777
MESSAGE
DATE OF MANUFACTURE:
Aug 29 2003
MESSAGE
DATE OF CALIBRATION:
Aug 29 2003