GE Portrait Hub01, User Manual

Page: 108 / 198

Trends
In this example:
●
Trends = Trends area title
●
2 hours, 4 hours, 8 hours, 12 hours, 24 hours = trend time interval selections
●
SpO2% = pulse oximetry label and unit of measure
●
PR/min = pulse rate label and unit of measure
●
RR/min = respiration rate label and unit of measure
●
Vertical axis = trend scales
●
Horizontal axis = time (HH:MM)
If there is no trend data available for a given time period, that is indicated with a break
in the data. If the data is outside of the trend scale displayed, it is indicated with a
dashed line for the data.
Using the trend cursor on the Central Viewer
Once in the Trends view, you can use the trend cursor to view the trended value(s)
at the selected moment of time. When hovering the cursor over an event marker in
the Single Patient View you can see the high and low limits of that event at the time
the event occurred. However, for an
SpO2 critically low event, only the low limit is
displayed, and for an Apnea event, only the apnea seconds setting is displayed. For
these two alarms the other limits cannot be set.
1. Using a mouse, do one of the following:
●
Hover the trends cursor over the trends graph to display the data.
●
Select a spot on the trends graph to lock the indicator to a particular spot of
interest to follow that data. Selecting again will unlock the indicator.
The trend cursor (vertical line) appears:
108
Portrait ™ Mobile Monitoring Solution
5815148-01