Chapter 5. Logging Data
Model PM880 Portable Hygrometer User’s Manual
83
5.3 Starting or Restarting a Log
The
Start
and
Start All Logs
commands enable you to restart a paused log
or start a pending log.
Note:
You cannot restart a log that is completed or ended using the
End
command.
Use the following steps to start or restart one or more logs:
5.3.0a Accessing the Log Manager
1.
If the menu is not active, press
[MENU]
.
2.
Use the arrow key to scroll to
Logging
and press
[ENTER]
.
3.
Use the arrow key to scroll to
Log Manager
and press
[ENTER]
.
5.3.0b Selecting a Log File
1.
Use the arrow key to scroll to the desired log.
Note:
The list of log files in the Log Manager can be listed chronologically
or alphabetically. Refer to
Sorting Files in the Site/Drive/Log
Manager
on page 108.
2.
Press
[MENU]
.
3.
Use the arrow key to scroll to
Log
and press
[ENTER]
.
4.
Use the arrow key to scroll to
Start
or
Start All Logs
and press
[ENTER]
.
The PM880 returns to the Log Manager, which displays the selected log as
Running
or
Pending
.
Next, do one of the following:
•
To start or restart another log, repeat the above steps.
•
To return to taking measurements, press
[F3]
(
Exit
) and then press
[MENU]
.
