Chapter 7. Using the PM880 with a PC and Printer
124
Model PM880 Portable Hygrometer User’s Manual
7.4 Printing Reports (cont.)
Next, do one of the following:
•
If desired, repeat steps 4 through 6 to print another report.
•
To exit and return to taking measurements, press
[F3]
(
Exit
) and then
press
[MENU]
.
7.5 Transferring a File To a PC
You can use the Site Manager, Drive Manager or the Log Manager to
transfer files to your PC. The Site Manager enables you to transfer site files
only; the Drive Manager enables you to transfer any file in the PM880; and,
the Log Manager enables you to transfer log files only.
Use the steps below to transfer files to your PC:
7.5.0a Preparing for File Transfer
1.
The PM880 IR function is already setup for IrDA infrared
communication. To change IR settings, refer to
Setting Up PM880 IR
Communications
on page 110.
2.
If you are using Windows NT 4.0, open the QuickBeam
®
software.
Proceed to the next section.
7.5.0b Accessing the Site, Drive or Log Manager
1.
If the menu is not active, press
[MENU]
.
2.
To transfer:
•
site, meter, log or snapshot files, press
Site
and press
[ENTER]
.
•
log files only, press
Logging
and press
[ENTER]
.
3.
Use the arrow key to scroll to:
•
Site Manager
and press
[ENTER]
- to transfer site files only.
•
Drive Manager
and press
[ENTER]
- to transfer all types of files.
•
Log Manager
and press
[ENTER]
- to transfer log files only.
