Chapter 7. Using the PM880 with a PC and Printer
Model PM880 Portable Hygrometer User’s Manual
123
7.4 Printing Reports
When used with an IR-compatible printer, the PM880 can print out a variety
of data (current site, logs, drive contents, and user functions, tables and
settings) using the Reports command. Use the steps below to print the
desired report:
IMPORTANT:
The PM880 IR function is already setup for IrDA infrared
communication. To change IR settings, refer to
Setting Up
PM880 IR Communications
on page 110
1.
If the menu is not active, press
[MENU]
.
2.
Use the arrow keys to scroll to
Service
and press
[ENTER]
.
3.
Use the arrow keys to scroll to
Reports
and press
[ENTER]
. A screen
similar to Figure 59 appears.
Figure 59: Reports Window
4.
Use the arrow keys to select the desired report.
5.
Make sure the IR beam on the PM880 has clear access to the IR sensor
on the printer.
6.
Press
[F2]
(
) to print out the desired reports.
