manualshive.com logo in svg

GE PM880, User Manual

The GE PM880 Operations & Installation Manual is a comprehensive guide that provides step-by-step instructions for setting up and operating the PM880 device. This manual is available for free download at manualshive.com, ensuring convenient access to essential information for users seeking to maximize the functionality of their PM880.

Share
Download
background image

Chapter 9. Features and Specifications

164

Model PM880 Portable Hygrometer User’s Manual

9.1  The PM880 Hygrometer (cont.)

The top of the PM880 (shown in Figure 75) includes an input for 
connecting moisture probes. An internal infrared transceiver enables 
communication between the meter and other IR devices, particularly the IR 

ports or IR to RS232 adapters of Windows

®

-based PCs or printers. Users 

can send and receive site and log data; they can also program the meter 
using the optional PanaView software interface. The PM880 was designed 
for use with products that comply to the IrDA protocol.

Figure 75: Probe Connection and Infrared Transceiver

9.2 Probes

Probes are the part of the system that come into contact with the process 
flow. The PM880 uses various types of probes to make moisture, 
temperature, and pressure measurements. 

Note:

Only GE standard probes can be used with the PM880.

•

Moisture (M) Series - moisture and temperature.

•

Three Function (TF) Series - moisture, temperature, and pressure.

•

Moisture Image Series (MIS) - moisture, temperature, and pressure.

Probe Cable Input

Infrared

Transceiver

Summary of Contents for PM880



























































































































































































































Reviews:

No comments

Related manuals for PM880

ABB SM1000 Replacing Instructions preview
SM1000
Brand: ABB Pages: 8
X-Rite 891 Operation Manual preview
891
Brand: X-Rite Pages: 80
JGR RL1 Manual preview
RL1
Brand: JGR Pages: 12
La Crosse Technology WS-7048U Instructional Manual preview
WS-7048U
Brand: La Crosse Technology Pages: 8
UEi C163 Quick Start Manual preview
C163
Brand: UEi Pages: 8
Palstar ZM-30 Operating Manual preview
ZM-30
Brand: Palstar Pages: 15
THORLABS PM10-10 Operation Manual preview
PM10-10
Brand: THORLABS Pages: 21
Halo Photonics Stream Line Pro Hardware And Software Manual preview
Stream Line Pro
Brand: Halo Photonics Pages: 45
Dive Perfect Stubby LED-1500 User Manual preview
Stubby LED-1500
Brand: Dive Perfect Pages: 4
Pilot Communications PMAC615 Installation & Operation Manual preview
PMAC615
Brand: Pilot Communications Pages: 34
Teledyne Lecroy Everywhereyoulook Frontline X500 Quick Start Manual preview
Everywhereyoulook Frontline X500
Brand: Teledyne Lecroy Pages: 8
Cal Test Electronics CT4196 User Manual preview
CT4196
Brand: Cal Test Electronics Pages: 14
METREL PowerQ4MI 2592 Instruction Manual preview
PowerQ4MI 2592
Brand: METREL Pages: 104
KUSSMAUL 091-198-12-PP Instruction Manual preview
091-198-12-PP
Brand: KUSSMAUL Pages: 7
MKS Ophir Ariel User Manual preview
Ophir Ariel
Brand: MKS Pages: 16
Jetco TTS-1000 Operation Manual preview
TTS-1000
Brand: Jetco Pages: 29
LaMotte SMART Spectro Operator'S Manual preview
SMART Spectro
Brand: LaMotte Pages: 49
Altronics Q1270B User Manual preview
Q1270B
Brand: Altronics Pages: 11

Brands by name

Popular brands

Load more brands