GE PanaFlow HT, User Manual

Page: 55 / 163

PanaFlow HT User’s Manual 45
Chapter 3. Initial Setup and Programming
3.6.2c Totalizer
To check and/or change totalizer measurement units, under
UserPref/Flow Units
,
use the [

] or [

] arrow key to select
Totalizer
and press
[

]
. A screen similar to
the following appears.
To remove Totals from display menus, use the [

] or [

] arrow key to select
No
and press
[

]
. The screen returns to the previous display. To continue setting up the
Totalizer, select
Yes
, press
Enter
, and a screen similar to the following appears.
Use the [

] or [

] arrow key to select
Actual
,
Standard
or
Mass
totals, press
[

]
twice, and a screen similar to the following appears.
If no change is required, press
[

]
. If change is required, select the appropriate
measurement category, and press
[

]
twice. A screen similar to the following
appears.
If no change is required, press
[

]
. If change is required, select the appropriate
measurement type, press
[

]
, and the display returns to the previous screen. Press
the [

] k
ey twice to return to the
UserPref/Flow Units
screen.
Totalizer / Totalizer
Volumetric (Act)
Volumetric (Std)
Mass