manualshive.com logo in svg

GE P642, Technical Manual, Page: 290 / 592

Share
Download
GE P642 Technical Manual Download Page 290

2

EVENT RECORDS

GE devices record events in an event log. This allows you to establish the sequence of events that led up to a
particular situation. For example, a change in a digital input signal or protection element output signal would
cause an event record to be created and stored in the event log. This could be used to analyse how a particular
power system condition was caused. These events are stored in the IED's non-volatile memory. Each event is time
tagged.

The event records can be displayed on an IED's front panel but it is easier to view them through the settings
application software. This can extract the events log from the device and store it as a single .evt file for analysis on
a PC.

The event records are detailed in the VIEW RECORDS column. The first event (0) is always the latest event. After
selecting the required event, you can scroll through the menus to obtain further details.

If viewing the event with the settings application software, simply open the extracted event file. All the events are
displayed chronologically. Each event is summarised with a time stamp (obtained from the Time & Date cell) and a
short description relating to the event (obtained from the Event Text cell. You can expand the details of the event
by clicking on the + icon to the left of the time stamp.

The following table shows the correlation between the fields in the setting application software's event viewer and
the cells in the menu database.

Field in Event Viewer

Equivalent cell in menu DB

Cell reference

User settable?

Left hand column header

VIEW RECORDS 

®

 Time & Date

01 03

No

Right hand column header

VIEW RECORDS 

®

 Event Text

01 04

No

Description

SYSTEM DATA 

®

 Description

00 04

Yes

Plant reference

SYSTEM DATA 

®

 Plant Reference

00 05

Yes

Model number

SYSTEM DATA 

®

 Model Number

00 06

No

Address

Displays the Courier address relating to the event

N/A

No

Event type

VIEW RECORDS 

®

 Menu Cell Ref

01 02

No

Event Value

VIEW RECORDS 

®

 Event Value

01 05

No

Evt Unique Id

VIEW RECORDS 

®

 Evt Unique ID

01 FE

No

The device is capable of storing up to 512 event records.

In addition to the event log, there are two logs which contain duplicates of the last 5 maintenance records and the
last 5 fault records. The purpose of this is to provide convenient access to the most recent fault and maintenance
events.

2.1

EVENT TYPES

There are several different types of event:

●

Opto-input events (Change of state of opto-input)

●

Contact events (Change of state of output relay contact)

●

Alarm events

●

Fault record events

●

Standard events

●

Security events

Chapter 13 - Monitoring and Control

P64x

266

P64x-TM-EN-1.3

Summary of Contents for P642

















































































































































































































































































































































































































































































































































































































Reviews:

No comments