GE Optica, Operator'S Manual

Page: 78 / 150

Programming the VGA Optica 4-19
January 2006
Set Time & Date
The Time and Date menu is accessed by selecting Set Time and
Date
on Menu 2, and pressing
ENTER
.
To set the Optica’s internal clock, press TAB to select each field of
the date and time, and press the up and down softkeys to set each
field. When the settings are correct, tab to the
OK button and press
ENTER
.
Figure 4-8: Time and Date
Restore Defaults
To access this choice, select the
Restore Defaults
button on Menu 2,
and press
ENTER
.
This screen resets all programmable items to the factory defaults
shown in Table 3-2 on page 3-9. Press
TAB to select Yes , and press the
ENTER
key.