manualshive.com logo in svg

GE OpenVPX VPXcel6 SBC622, Hardware Reference Manual

The GE OpenVPX VPXcel6 SBC622 is a powerful single board computer designed for rugged environments. To ensure smooth operation, make sure to consult the comprehensive Hardware Reference Manual, available for free download from our website. Discover the full potential of this product by accessing the manual today.

Share
Download
background image

List of Tables  9

Table A-5 PCIe Expansion Plane (P2)   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71
Table A-6 PCIe Expansion Plane (J2)    . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71
Table A-7 PMC I/O (Site #1) and COM1 (P3)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72
Table A-8 PMC I/O (Site #1) and COM1 (J3)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72
Table A-9  XMC I/O (Site #1), COM2, Control Plane, and Misc. I/O (P4)   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73
Table A-10  XMC I/O (Site #1), COM2, Control Plane, and Misc. I/O (J4)   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73
Table A-11  PMC I/O (Site #2), Audio, Speaker (P5)   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74
Table A-12 PMC I/O (Site #2), Audio, Speaker (J5)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74
Table A-13  XMC I/O (Site #2), Video, USB, SATA (P6)   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75
Table A-14  XMC I/O (Site #2), Video, USB, SATA (J6) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75
Table A-15 Serial Connector Pinout (J10) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76
Table A-16 USB Connectors (J1, J3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76
Table A-17 Ethernet Connectors 10/100/1000 Mbit (J2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Table A-18 PMC Site 1 Connector Pinouts (J11) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78
Table A-19 PMC Site 1 Connector Pinouts (J12) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79
Table A-20 PMC Site 1 Connector Pinouts (J13) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80
Table A-21 PMC Site 1 Connector Pinouts (J14) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
Table A-22 XMC1 Site 1 Connector Pinouts (J15)   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82
Table A-23 XMC1 Site 1 Connector Pinouts (J16)   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .83
Table A-24 PMC Site 2 Connector Pinouts (J21) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84
Table A-25 PMC Site 2 Connector Pinouts (J22) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85
Table A-26 PMC Site 2 Connector Pinouts (J23) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86
Table A-27 PMC Connector and Pinouts (J24)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87
Table A-28 XMC2 Site 2 Connector Pinouts (J25)   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88
Table A-29 Pinouts for XMC Connector Site 2 (J26)   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .89
Table B-1 BIOS Firmware, First Boot Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .90
Table B-2 BIOS Main Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .91
Table B-3 BIOS Advanced Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .92
Table B-4 BIOS Chipset Menu  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .93
Table B-5 BIOS Boot Menu  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95
Table B-6 BIOS Security Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96
Table B-7 BIOS Save & Exit Menu  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .97
Table C-1 Environmental Specifications by Level  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98

Summary of Contents for OpenVPX VPXcel6 SBC622




































































































Reviews:

No comments

Related manuals for OpenVPX VPXcel6 SBC622

Portwell ROBO-667 User Manual preview
ROBO-667
Brand: Portwell Pages: 7
ST STM32479I-EVAL User Manual preview
STM32479I-EVAL
Brand: ST Pages: 77
AMPTRON PII-3100 User Manual preview
PII-3100
Brand: AMPTRON Pages: 16
ASROCK 770 Extreme3 User Manual preview
770 Extreme3
Brand: ASROCK Pages: 56
Biostar P4SDQ Description preview
P4SDQ
Brand: Biostar Pages: 23
Nuvoton NuMicro NuTiny-SDK-NANO100 User Manual preview
NuMicro NuTiny-SDK-NANO100
Brand: Nuvoton Pages: 18
DAQ system USB-EK01 User Manual preview
USB-EK01
Brand: DAQ system Pages: 52
Xilinx Spartan-7 SP701 Quick Start Manual preview
Spartan-7 SP701
Brand: Xilinx Pages: 4
DFI CA100-D User Manual preview
CA100-D
Brand: DFI Pages: 115
SELVA MARINE Black Bass 7 Owner'S Manual preview
Black Bass 7
Brand: SELVA MARINE Pages: 35
Semtech SX1211-11SKA868 User Manual preview
SX1211-11SKA868
Brand: Semtech Pages: 30
ASROCK X570 Taichi Manual preview
X570 Taichi
Brand: ASROCK Pages: 244
Gigabyte GA-8IP775 Series User Manual preview
GA-8IP775 Series
Brand: Gigabyte Pages: 80
Texas Instruments TAS5001-5122C2EVM User Manual preview
TAS5001-5122C2EVM
Brand: Texas Instruments Pages: 27
Gigabyte GA-M61VME-S2 User Manual preview
GA-M61VME-S2
Brand: Gigabyte Pages: 88
Wave Mate Z80 Super Bullet Manual preview
Z80 Super Bullet
Brand: Wave Mate Pages: 25
S&T Kontron mITX-VR1000 V2.0 Quick Installation Manual preview
Kontron mITX-VR1000 V2.0
Brand: S&T Pages: 8
DFI LanParty DK 790GX-M2RS User Manual preview
LanParty DK 790GX-M2RS
Brand: DFI Pages: 154

Brands by name

Popular brands

Load more brands