manualshive.com logo in svg

GE Multilin DFF, Instruction Manual, Page: 48 / 74

Share
Download
GE Multilin DFF Instruction Manual Download Page 48

KEYPAD AND DISPLAY 

GEK-106166E 

DFF Digital Feeder Relay 

47 

9.2   SETTINGS MENU GROUP. 

The DFF relay has some settings groups common to all tables but other groups are particular for each settings table. 

The common settings are the following ones: 

• 

GENERAL SETTINGS 

• 

ACTIVE TABLE 

• 

OSCILLOGRAPHY MASK 

• 

FUNCTION PERMIT 

The rest of the setting groups are independent for each of the setting tables. 

 

This menu group allows the user to view and modify the DFF’s settings. To access this group, the 

SET

 key must be 

pressed when the DFF is in the standby mode, showing 

DFF - GENERAL ELECTRIC

. The following message will be 

displayed: 

 

 

 

 

Pressing either the 

↑

/

↓

  keys, the following message will be displayed: 

 

 

 

DFF settings menu tree is represented in the following table. It is important to remember that in order to go into the 
tree (go from Level 1 to Level 2) 

ENT 

key must be pressed, and that to come out of the tree (go from Level 2 to Level 

1) the 

CLR

 key must be pressed. 

VIEW PROTECTION 

SETTINGS

CHANGE PROTECT 

SETTINGS

Summary of Contents for Multilin DFF











































































Reviews:

No comments