CHAPTER 1: GETTING STARTED
SETTING UP COMPUTER-TO-DDFR ETHERNET COMMUNICATIONS
DISTRIBUTED DIGITAL FAULT RECORDER – INSTRUCTION MANUAL
13
Note
The DDFR is shipped from the Factory with the following default network parameters.
These parameters
must
be reconfigured immediately to ensure that Network IP address
conflicts do not occur.
To reconfigure the DDFR network parameters in your new DDFR,
Z
Press the
DDFR Setup
button at the top left of the screen, or
alternatively select
Communications > DDFR Setup
from the main
menu, to open the DDFR Setup Screen as shown in figure 1-4
below:
FIGURE 1–4: DDFR Setup Screen
Table 1–3: Default DDFR IP Configuration
IP Address
Net Mask
Gateway
192.168.2.254
255.255.255.0
192.168.2.1
Summary of Contents for Multilin DDFR
Page 3: ......
Page 4: ......
Page 8: ...TOC IV DISTRIBUTED DIGITAL FAULT RECORDER INSTRUCTION MANUAL TABLE OF CONTENTS ...
