manualshive.com logo in svg

GE Multilin DDFR, Instruction Manual

Share
Download
GE Multilin DDFR Instruction Manual Download Page 103

CHAPTER 5: RETRIEVING AND VIEWING DDFR ARCHIVER DATA

VIEWING DATA IN THE DDFR ARCHIVER

DISTRIBUTED DIGITAL FAULT RECORDER – INSTRUCTION MANUAL

95

Z

Continue the process, pressing 

Next

 each time, until the merge 

process is complete.

5.3.3.3 Waveform Resample

Z

On the Archiver Waveform Menu, click on 

Resample

.

Z

Follow a procedure similar to 

Merge

 above.

5.3.3.4 Viewing Retrieved Waveform Files

The Waveform Viewer feature within the DDFR Archiver provides a visual display of power 
systems data and relay operation data captured during a specific triggered event. 

Previously captured and saved Waveform files (Oscillography/COMTRADE, .CFG) can be 
retrieved and viewed as follows: 

Z

From the main DDFR Archiver Screen, select 

Waveforms

.

The following screen displays:

Z

Click 

View

 to open the Waveform records as shown in section 

5.3.3.1.

Summary of Contents for Multilin DDFR























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands