manualshive.com logo in svg

GE Multilin 850, Instruction Manual, Page: 148 / 664

Share
Download
GE Multilin 850 Instruction Manual Download Page 148

3–54

850 FEEDER PROTECTION SYSTEM – INSTRUCTION MANUAL

SOFTWARE INTERFACE

CHAPTER 3: INTERFACES

Transient Recorder 

(Waveform Capture)

The EnerVista 8 Series Setup software can be used to capture waveforms (or view trace 
memory) from the relay at the instance of a pickup, trip, alarm, or other condition.
•

With EnerVista 8 Series Setup software running and communications established, 
select the 

Records > Transients > Transient Records

 menu item to open the 

Transient Recorder Viewer window.

•

Click  on 

Trigger Waveform

 to trigger a waveform capture.

•

To view the captured waveforms, click on the 

Launch Viewer

 button. A detailed 

Waveform Capture window appears as shown below.

•

Click  on  the 

Save 

button to save the selected waveform to the local PC. A new window 

appears, requesting the file name and path. One file is saved as a COMTRADE file, with 
the extension "CFG." The other file is a "DAT" file, required by the COMTRADE file for 
proper display of waveforms.

•

To view a previously saved COMTRADE file, click the 

Open

 button and select the 

corresponding COMTRADE file.

Summary of Contents for Multilin 850

























































































































































































































































































































































































































































































































































































































































































Reviews:

No comments